Three-phase Electrical Voltage Sensors for Monitoring

Detailed Product Description

1 Technical Parameters for JSCZJ1-10I (II) Electrical Voltage Sensors for Monitoring

1.1 Power supply: AC220V and 50Hz

1.2 Display mode: Digit

1.3 Display bit: three bits

1.4 Display Accuracy: ≤10%

1.5 Loss: 2W

1.6 Range of monitoring voltage: 10kV

2 Characters and Applicable Scope                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          2.1 2.1 Conforming to the requirements on DL/T 538-2006 HV Charged Display Device and GB/T 20840.7-2007 Section 7 of Transformer: Electronic Voltage Transformer (IEC 60044-7:1999, MOD), the sensor has been designed by adopting modern advanced instrument integrated block in terms of linear circuit and digital circuit technology. As the best choice for monitoring voltage of electrical devices, it can be used to monitor the continuous change and display clearly and visually in digit.

2.2 Made up of sensor and display, the JSCZJ1-10 electrical voltage monitoring sensor's secondary inductive signal shall be sent to the display by means of transmission line to indicate the status of charge or not as well as to show the voltage.